基于NURBS的PDE曲面构造法研究及应用

由非均匀有理Ｂ样条曲线曲面给定边界条件，用偏微分方程来构造曲面，以参数“ａ”控制其整体形状，本文分析其思路原理及过程，并列举了在ＣＡＤ上的应用，最后分析了优缺点。     

复合材料边界元素法研究

边界元法是一种迅速发展的数值解法.本文研究了在复合材料层合板中运用平面二次边界元法的有关问题.首先,讨论了将层合板等效为一般正交各向异性单层板的方法;其次,给出了偏轴情况下的基本解,研究了直线型二次边界元偏轴影响系数的解析计算以及域内应力表达式;最后对算例进行了计算,所得结果与相应的解析解和有限元相符甚好.     

Stress analysis with arbitrary body force by boundary element method

Linear stress analysis without body force can be easily carried out by means of the boundary element method. Some cases of linear stress analysis with body force can also be solved without the domain integral. However domain integrals are generally necessary to solve the linear stress problems with complicated body forces. This paper shows that the linear stress problems with complicated body forces can be solved approximately without the domain integral. In order to solve these problems, the domain is divided into small areas using contour lines of body force. In these areas, the distributions of body force are assumed approximately to satisfy the Laplace equation.     

横观各向同性土介质与结构物共同作用的有限元与边界元耦合分析

本文采用有限元与边界元耦合方法对上与结构物进行共同作用的分析．其中上部结构采用有限元子结构法，地基上考虑为横观各向同性特性，应用边界元法，通过基础界面上位移连续、面力平衡的条件进行耦合分析．编制了相应的计算程序，对某高层空间剪力培与地基的共同作用进行了计算，与有限元法和实测结果进行了对比分析，得到了满意的结果．说明：有限元和边界元的耦合方法能充分发挥两者的优越性，不失为共同作用分析的一种有效途径．     

Heat transfer in YBaCuO thin film/sapphire substrate system

The thermal boundary resistance at the YBaCuO thin film/Al₂O₃ substrate interface was investigated. The transparency for thermal phonons incident on the interface as well as for phonons moving from the substrate was determined. We have measured a transient voltage response of current-biased films to continuously modulated radiation. The observed knee in the modulation frequency dependence of the response reflects the crossover from the diffusion regime to the contact resistance regime of the heat transfer across the interface. The values of transparency were independently deduced both from the phonon escape time and from the time of phonon return to the film which were identified with peculiarities in the frequency dependence. The results are much more consistent with the acoustic mismatch theory than the diffuse mismatch model.We are grateful to A. Elantev for helpful discussion. We acknowledge the financial support of the Russian Scientific Council on the HTS problem (Project No. 90462).     

Quantitative studies on the movement of fluid and lymphocytes through periodontal tissue and into the draining lymph.

Chronic lymph drainage techniques in sheep have been used to map the pathways and to quantify the fluid and cell traffic through periodontal tissues. The continuous collection of cervical and prescapular lymph has demonstrated that 65% of labelled protein tracer injected into the periodontal tissues could be found in lymph over a period of 7.5 hours. Nearly 90% of the total radioactivity could be accounted for between the lymph and the tissue site. When silk was impregnated with radiolabelled albumin and a tooth ligated, the kinetics of the subsequent appearance of the tracer in lymph emphasized the ease with which macromolecules surrounding the teeth gain access to the lymphatics, regional lymph nodes, and immune apparatus. Animals were primed with BCG and then tuberculin (delayed hypersensitivity) lesions were simultaneously induced in the skin, bowel, and periodontium. When T cells were labelled with radioisotopes and their migration from blood to lymph measured, the periodontal tissue traffic pattern was distinct from the traffic pattern through DTH in the skin and also distinct from the pattern through the small intestine. This indicates that the lymphocyte traffic through the inflamed periodontium has unique features. This tissue specificity was not apparent when lesions were induced with TNFalpha. The static assessment of lymphocyte subsets within the tissues was also assessed with immunohistochemistry.     

水利工程排涝减灾效益分析与计算

在分析涝灾成因特点基础上对涝灾进行了重新定义，在研究涝灾损失及 排涝效益时引入了临界降雨量的概念，从而奠定了水利工程排涝减灾效益分析与计算的理论基础，并给了效益计算的一般计算模型。     

AutoCAD在更改连铸设备布局设计中的应用

将AutoCAD应用到更改连铸设备布局设计中，可使更改过程一目了然。     

涟钢连铸优质钢的实践分析

本文介绍涟钢第一炼钢厂１号小方坯连铸机浇铸优质钢的生产实践，并探索连铸优质钢的途径。指出为保证质量，必须严格保证钢水质量，控制合适的浇铸温度，拉坯速度和冷却强度；钢水必须吹氩；采用大容量中间包和伸入式水口保护渣浇涛，确保连铸机的状况良好。     

连铸坯的液芯轧制

研究了连铸坯的液芯轧制，并结合日本川崎永岛厂的实例，证实了连铸坯液芯轧制的可行性，指出了钢锭和连铸坯液芯轧制的区别，及如何制造压应力状态，推导了坯壳应力与轧辊直径压下量，坯壳厚度的关系，并提出了用振摆式轧机实施连铸机液芯轧制的方案。